Floor waxing
6KF%5b%7d4F8%404IEGZN(1.jpg)
Service introduction
1）Waxing tools:
dust and water vacuum, multifunctional cleaner, high-speed polisher, black wax-stripping pad, red cleaning pad, white cleaning pad, dial, hard brush, towel, brush cover, wax swab, and marble blade.
2）Detergents and waxes:
wax stripper, neutral or alkaline ground detergent, polishing-free wax, base wax and surface wax.
3） Waxing procedures
(1) There’s wax on the ground
a. Remove original wax with black wax-stripping pad and wax stripper, and then vacuum the sewage;
b. Wash the ground with clean water by red cleaning pad or hard brush until the ground is clean, and then vacuum the sewage;
c. After the ground is dry, seal the ground with ground sealing agent;
d. After the ground sealing agent is dry, apply the surface wax.
(2) There’s no wax on the ground
a. Wash the ground with neutral or alkaline ground detergent by hard brush or red cleaning pad. In case of smears or stains, remove them with marble blade, and then vacuum the sewage.
b. Wash the ground with clean water until the ground is clean, and then vacuum the sewage.
c. After the ground is dry, apply the wax.
4） Waxing method and notes
a. Apply the next layer after the previous layer is dry.
b. Apply the next layer in a stagger angle with the previous layer (vertical is preferred).
c. Ensure wax layers are thin and even. Every layer shall be finished one time, and repeated waxing of one layer is not allowed.
